Globe Dry Valve

Globe Fire Sprinkler Corporation introduces the new Model RCW Water Control Valve for Dry Pipe; Preaction; and Deluge applications. The RCW has been engineered to mitigate many of the field issues historically seen with hydraulically operated differential style valves. One common valve body is utilized for all of the above mentioned system types. The valve and trim options have been engineered with attributes which are most important to both the installer as well as the end user. The valve is offered in Grooved by Grooved configuration.

Grip Lock

resize 2
Grip lock the customer benefit for this product is that you no longer have to isolate a part of the building or drain down a part of the building. So in typical plastic application they use a solvent cement that takes a specific amount of time based on temp and size to cure. With this you isolate and turn system back on. No down time!

Quick Torque

resize 3
Head adaptor that is specific to spears. They invented the torque safe head adaptor years ago and it was a hit. Customer love the fact that you don’t have to use Teflon tape and or dope to seal the head in the adaptor. Plus with the torque safe you can not over tighten the head and crack the plastic as the brass spins instead of stress cracking the plastic Now they have launched the quick 2 which is less threads and even easier to put the sprinkler head in.

Globe Dry Valve

The revolutionary design of the new Globe UMC Universal Manifold Check can cut your installation time of floor control and shotgun riser assemblies by at least half. It integrates all the necessary components into a single assembly — resulting in the industry’s most compact footprint. The Globe UMC is available in many configurations, allowing you to order the type that meets your specific needs — and eliminates the need to order separate riser manifolds and control, check and relief valve kits. It also includes a UL listed and FM approved adjustable relief valve that can be set to > 200 PSI test without removal.

Globe’s Model QD Quick Drain, a UMC accessory, can save half the time of traditional hard piped drains, allowing for faster installations and lower costs. Instructional videos can be found here under the ‘installation’ category

VK514 - ESFR Pendent

Viking Specific Application Early Suppression Fast Response (ESFR) Pendent Sprinkler VK514 incorporates the capability to suppress specific high-challenge fires. The addition of a larger K-Factor allows protection of higher hazard commodities at greater ceiling heights with lower end-head pressures.

K28.0 sprinklers can provide flexibility of fire protection designs and eliminate the use of in-rack sprinklers when protecting high piled storage of​ certain specified materials up to: UL – 43 ft. (13.1 m) with ceilings up to 48 ft. (14.6 m) and FM – 50 ft. (15.2 m) with ceilings up to 55 ft. (16.8 m)

Viking VK514 ESFR Pendent Sprinklers are primarily intended to protect the following types of storage, which tend to produce severe-challenge fires: palletized and solid pile storage and single, double, and portable open rack storage (no open-top containers or solid shelves). The VK514 is listed to utilize a minimum aisle width of 6’-0” (UL – 43’ storage) or 8’-0” (FM – 50’. storage).

Viking Foam Products